Template:Map Features:addr

Addresses

This is used to provide postal information for a building or facility. See the pages titled Addresses and addr=* for an introduction on its usage.

Key	Value	Element	Comment	Rendering	Photo
Tags for individual houses
addr:housenumber	user defined		The house number (may contain letters, dashes or other characters). Addresses describes ways to tag a single building with multiple addresses. Please do not only tag addr:housenumber=*, but also add at least addr:street=* or addr:place=* for places without streets (or map the belonging to a street with a relation using associatedStreet relation or street relation.)
addr:housename	user defined		The name of a house. This is sometimes used in some countries like England, Spain, Portugal, Latvia instead of (or in addition to) a house number.
addr:flats	user defined		The unit numbers (a range or a list) of the flats or apartments located behind a single entrance door.
addr:conscriptionnumber	user defined		This special kind of housenumber relates to a settlement instead of a street. Conscription numbers were introduced in the Austro-Hungarian Empire and are still in use in some parts of Europe, sometimes together with street-related housenumbers which are also called orientation numbers.
addr:street	user defined		The name of the respective street. If the street name is very long or nonexistent, the ref of the respective street. A way with highway=* or a square with place=square and the corresponding name should be found nearby. The belonging to a street can alternatively be represented by a associatedStreet relation or street relation. The keys addr:housenumber=* and addr:street=* in principle are the only necessary ones if there are valid border polygons. If you are not sure if it is so, just add addr:city=*, addr:postcode=* and addr:country=*.
addr:place	user defined		This is part of an address which refers to the name of some territorial zone (usually a place=* like island, square or very small village) instead of a street (highway=*). Should not be used together with addr:street=*.
addr:postcode	user defined		The postal code of the building/area. Some mappers prefer to rely on boundary=postal_code
addr:city	user defined		The name of the city as given in postal addresses of the building/area. (In some places the city in the address corresponds to the post office that serves the area rather than the actual city, if any, in which the building is located.) Some mappers assume it can be derived from a boundary=administrative relation.
addr:country	user defined		The ISO 3166-1 alpha-2 two letter country code in upper case. Example: "DE" for Germany, "CH" for Switzerland, "AT" for Austria, "FR" for France, "IT" for Italy. Caveat: The ISO 3166-1 code for Great Britain is "GB" and not "UK". More or less favoured in different national communities.
addr:postbox	user defined		Use this for addressing postal service Post Office Box (PO Box, BP - Boîte Postale, CP - Case Postale, Поштански преградак, Поштански фах, Поштански претинац) as alternative to addressing using street names. Example: "PO Box 34"
addr:full	user defined		Use this for a full-text, often multi-line, address if you find the structured address fields unsuitable for denoting the address of this particular location. Examples: "Fifth house on the left after the village oak, Smalltown, Smallcountry", or addresses using special delivery names or codes (possibly via an unrelated city name and post code), or PO Boxes. Beware that these strings can hardly be parsed by software: "1200 West Sunset Boulevard Suite 110A" is still better represented as addr:housenumber=1200 + addr:street=West Sunset Boulevard + addr:unit=110A.
For countries using hamlet, subdistrict, district, province, state, county
addr:hamlet	user defined		The hamlet of the object. In France, some addresses use hamlets instead of street names, use the generic addr:place instead.
addr:suburb	user defined		If an address exists several times in a city. You have to add the name of the settlement. See Australian definition of suburb.
addr:subdistrict	user defined		The subdistrict of the object.
addr:district	user defined		The district of the object.
addr:province	user defined		The province of the object. For Canada, uppercase two-letter postal abbreviations (BC, AB, ON, QC, etc.) are used. In Russia a synonym {{{key:addr:region}}} is widely used
addr:state	user defined		The state of the object. For the US, uppercase two-letter postal abbreviations (AK, CA, HI, NY, TX, WY, etc.) are used.
addr:county	user defined		The county of the object.
Tags for interpolation ways
addr:interpolation	all/even/odd/ alphabetic		How to interpolate the house numbers belonging to the way along the respective street. See detailed description.
addr:interpolation	Number n		Every nth house between the end nodes is represented by the interpolation way.
addr:inclusion	actual/estimate/potential		Optional tag to indicate the accuracy level of survey used to create the address interpolation way. See detailed description.

This section is a wiki template with a default description in English. Editable here.

Template documentation

This documentation is transcluded from Template:Map Features:addr/doc. (Edit | history)
Note to editors: Please don't categorize this template by editing it directly. Instead, place the category in its documentation page, in its "includeonly" section.

Template for the Addresses table in the Map Features page. Use the default English text or use the template arguments for your translations

Usage

All parameters are optional. By default, text is in English.

• English writers shall write their comments in the template itself (avoiding double edition).
• Other languages are translated in template arguments, not in the template itself.

Headers/footers

• name = === Section header line ===
• description = Displayed before the table; optional

Table column headers

• head:key = Key
• head:value = Value
• head:element = Element
• head:desc = Comment
• head:render = Rendering
• head:photo = Photo

Table subsections (row groups)

• head:subsection = Text of the subsection header row

For each table row for a tag whose key is addr:subkey

• addr:subkey:key = Key:addr:subkey
• addr:subkey:value = (subkey name)
• addr:subkey:desc = (Description)
• addr:subkey:render =
• addr:subkey:photo =

Template to copy/paste in translations

<noinclude>{{Languages}}
</noinclude>{{Map Features:addr
|name         =
|description  =
|addr:key     = 

|head:key     =
|head:value   =
|head:element =
|head:desc    =
|head:render  =
|head:photo   =


|head:house_tags =

|addr:housenumber:value =
|addr:housenumber:desc  =
|addr:conscriptionnumber:value =
|addr:conscriptionnumber:desc  =
|addr:housename:value =
|addr:housename:desc  =
|addr:street:value =
|addr:street:desc  =
|addr:place:value =
|addr:place:desc  =
|addr:postcode:value =
|addr:postcode:desc  =
|addr:city:value =
|addr:city:desc  =
|addr:country:value =
|addr:country:desc  =
|addr:full:value =
|addr:full:desc  =


|head:hamlet_subdistrict_district_province =

|addr:hamlet:value =
|addr:hamlet:desc  =
|addr:suburb:value =
|addr:suburb:desc  =
|addr:subdistrict:value =
|addr:subdistrict:desc  =
|addr:district:value =
|addr:district:desc  =
|addr:province:value =
|addr:province:desc  =
|addr:state:value =
|addr:state:desc  =


|head:interpolation_tags =

|addr:interpolation:value =
|addr:interpolation:desc  =
|addr:interpolation:number:value =
|addr:interpolation:number:desc  =
|addr:inclusion:value =
|addr:inclusion:desc  =
}}